In daily work, we often encounter some minor printing problems. For example, paper is too thick or too thin to print; nozzles are often blocked; both want to save money and want to print good quality photos. As a matter of fact, as long as we pay attention to observation and use our brains, we will be able to grasp the tricks in them and the method will not be difficult. The following tips are all experiences that many users have personally learned and summarized. They are very easy to use and they will learn and learn. Keeping them in mind will bring a lot of convenience to you.
First, iron help, spray effect do not have to
When using an inkjet printer to output images, if you use our common paper to output, the realistic effect of image output is often compromised. If you want to improve the output, you can use professional photo paper to output, but photo-quality printing paper is expensive, the cost will be greatly improved. To get good results on plain printing paper, the most common irons are needed. The reason is that as long as you think of ways to increase the speed at which ordinary paper absorbs ink, you can greatly improve the effect of jet print output.
Before using ordinary printing paper, look for an ordinary household iron and turn off the steam function first; then, like ironing clothes, iron the regular printing paper to be used evenly for a few seconds so that the paper can be printed. More even and smooth; when you feel that the printing paper is slightly warmer, immediately put it into the printer and execute a print command. Since the temperature of the surface of the printing paper increases, the ink that is sprayed onto the surface can be short-lived. The time is quickly evaporated and dried to avoid the mutual penetration of ink, so that the final output image feels more sharp and clear, thus ensuring the improvement of the printing effect.
It should be noted that when using this method, we must pay attention to control the level of temperature achieved when the printed paper is heated; when the temperature of the paper to be ironed is about 70°C, the surface temperature of the paper is about 1 minute. The inside will not come down; overheating the surface of the paper may make the printed paper hard and brittle.
Second, thin paper printing tips
We know that printers, especially laser printers, have limited paper types, and papers that are too light and too heavy cannot support them. The general printer does not provide the thin paper printing settings. Generally speaking, the laser printer can only print 70g A4 format paper at the thinnest level. If the paper is too thin, it is easy to jam. However, there are ways to print thin paper.
First of all, take a standard A4 paper (the width of the tissue paper is the same), fold the side (usually the narrow side) of the feeding paper by 5 to 10 mm; then, sandwich the thin paper to be printed, and then fold the edge. Put it inwards into the printer tray for normal printing. You can also put more than one copy into the paper tray at a time to print multiple copies. This method is not only suitable for inkjet, laser printers, but also for ordinary copiers.
Third, thick paper printing tips
Usual inkjet and laser printers can feed paper, mainly relying on the pick roller to feed the paper. If the paper feeding is not smooth, we can solve the problem by cleaning the pickup roller or renewing the pickup roller. However, if you encounter thicker paper, even having a new pickup roller will not solve the problem. At this time, we only need to move slightly to solve it easily.
First, cut a thick piece of paper (usually 3 times the thickness of the photo paper) that can surround the pickup roller. Then open the pickup rubber rubber and use the paper that you just cut to raise the rubber. . Finally, stuff the paper into the rubber skin. In addition to this method, you can replace the thinner rubber with a thicker one.
Fourth, solve the problem of gradually blurred printing
When many users use the ink-filled printer to print data, some of the files at the beginning are clear and without any problems, but the contents of the following files are gradually blurred or even blurred. This is actually due to the clogging of the printer's inkjet nozzle. The easiest way is of course to change a new one, but if you want to save money, you have to do it yourself.
First, remove the ink cartridge, and then flush the ink filling area with tap water with water pressure until the ink nozzle flows out of the colorless water. Then, the ink cartridge is left to dry in a dry place, and then the ink is refilled, and the printer can be used normally.
Fifth, improve the sharing speed of LAN
Many times we will find that the output speed of shared printers will be slow. This is mainly because in a short time, each shared printer in the office will send task list information and current status information to the LAN at regular intervals. This will cause "traffic jam" to the network bandwidth and slow down the speed. If you want to improve the speed of shared print output, as long as you debug the settings, the "traffic jam" phenomenon is easy to solve.
First, click the "Start" button on the desktop of the computer system where the shared printer is located, execute the "Run" command from the pop-up "Start" menu, enter "Regedit" in the Run dialog box, and click "OK" to open the Registry Editor window. Then, in the left display area, use the mouse to expand the "HKEY_LOCAL_MACHINE" registry branch, and then select the registry subkey "SYSTEMCurrentControlSetControlPrint" below the branch that pops up next, in the right display area corresponding to the "Print" subitem , to see if there is a double-byte value of "ServerThreadTimeout". If the key value is not found, click "Edit", "New", "Double-Byte Value" command in the registry edit window with the mouse, and at the same time The newly created double-byte value name is "ServerThreadTimeout". Finally, double-click the double-byte value "ServerThreadTimeout" to open the value setting window and enter an appropriate time interval in the window. For example, if you enter "60000", it means that the shared printer will be sent to the local network every 1 minute. Send status information or task list information once. After the settings are complete, click OK and press the F5 function key on the keyboard to refresh the system registry. The above settings will take effect. With this setting, the print speed will naturally be faster.
Six, spray plug repair can be very simple
Jet plugging is a problem that often occurs during use, but many people will complicate simple issues and make maintenance more difficult. The following small series describes a simple and safe method:
First, prepare a set of discarded ink cartridges, buckle the top of the discarded ink cartridges, remove the sponge inside, and clean the ink cartridges, then re-glue them to the ink cartridges with 2/3 of the original top. When the ink cartridge is clogged, the ink cartridge is changed to the position of the blocked color, and pure water, or alcohol and other special cleaning solutions are injected into the ink cartridge for several hours. The time can be controlled according to the degree of clogging, and it can be repeatedly operated in the middle of the entire process. The water in the cartridge cannot be dried up. If you replace the chip on the cartridge, use a cleaning program that works better.
First, iron help, spray effect do not have to
When using an inkjet printer to output images, if you use our common paper to output, the realistic effect of image output is often compromised. If you want to improve the output, you can use professional photo paper to output, but photo-quality printing paper is expensive, the cost will be greatly improved. To get good results on plain printing paper, the most common irons are needed. The reason is that as long as you think of ways to increase the speed at which ordinary paper absorbs ink, you can greatly improve the effect of jet print output.
Before using ordinary printing paper, look for an ordinary household iron and turn off the steam function first; then, like ironing clothes, iron the regular printing paper to be used evenly for a few seconds so that the paper can be printed. More even and smooth; when you feel that the printing paper is slightly warmer, immediately put it into the printer and execute a print command. Since the temperature of the surface of the printing paper increases, the ink that is sprayed onto the surface can be short-lived. The time is quickly evaporated and dried to avoid the mutual penetration of ink, so that the final output image feels more sharp and clear, thus ensuring the improvement of the printing effect.
It should be noted that when using this method, we must pay attention to control the level of temperature achieved when the printed paper is heated; when the temperature of the paper to be ironed is about 70°C, the surface temperature of the paper is about 1 minute. The inside will not come down; overheating the surface of the paper may make the printed paper hard and brittle.
Second, thin paper printing tips
We know that printers, especially laser printers, have limited paper types, and papers that are too light and too heavy cannot support them. The general printer does not provide the thin paper printing settings. Generally speaking, the laser printer can only print 70g A4 format paper at the thinnest level. If the paper is too thin, it is easy to jam. However, there are ways to print thin paper.
First of all, take a standard A4 paper (the width of the tissue paper is the same), fold the side (usually the narrow side) of the feeding paper by 5 to 10 mm; then, sandwich the thin paper to be printed, and then fold the edge. Put it inwards into the printer tray for normal printing. You can also put more than one copy into the paper tray at a time to print multiple copies. This method is not only suitable for inkjet, laser printers, but also for ordinary copiers.
Third, thick paper printing tips
Usual inkjet and laser printers can feed paper, mainly relying on the pick roller to feed the paper. If the paper feeding is not smooth, we can solve the problem by cleaning the pickup roller or renewing the pickup roller. However, if you encounter thicker paper, even having a new pickup roller will not solve the problem. At this time, we only need to move slightly to solve it easily.
First, cut a thick piece of paper (usually 3 times the thickness of the photo paper) that can surround the pickup roller. Then open the pickup rubber rubber and use the paper that you just cut to raise the rubber. . Finally, stuff the paper into the rubber skin. In addition to this method, you can replace the thinner rubber with a thicker one.
Fourth, solve the problem of gradually blurred printing
When many users use the ink-filled printer to print data, some of the files at the beginning are clear and without any problems, but the contents of the following files are gradually blurred or even blurred. This is actually due to the clogging of the printer's inkjet nozzle. The easiest way is of course to change a new one, but if you want to save money, you have to do it yourself.
First, remove the ink cartridge, and then flush the ink filling area with tap water with water pressure until the ink nozzle flows out of the colorless water. Then, the ink cartridge is left to dry in a dry place, and then the ink is refilled, and the printer can be used normally.
Fifth, improve the sharing speed of LAN
Many times we will find that the output speed of shared printers will be slow. This is mainly because in a short time, each shared printer in the office will send task list information and current status information to the LAN at regular intervals. This will cause "traffic jam" to the network bandwidth and slow down the speed. If you want to improve the speed of shared print output, as long as you debug the settings, the "traffic jam" phenomenon is easy to solve.
First, click the "Start" button on the desktop of the computer system where the shared printer is located, execute the "Run" command from the pop-up "Start" menu, enter "Regedit" in the Run dialog box, and click "OK" to open the Registry Editor window. Then, in the left display area, use the mouse to expand the "HKEY_LOCAL_MACHINE" registry branch, and then select the registry subkey "SYSTEMCurrentControlSetControlPrint" below the branch that pops up next, in the right display area corresponding to the "Print" subitem , to see if there is a double-byte value of "ServerThreadTimeout". If the key value is not found, click "Edit", "New", "Double-Byte Value" command in the registry edit window with the mouse, and at the same time The newly created double-byte value name is "ServerThreadTimeout". Finally, double-click the double-byte value "ServerThreadTimeout" to open the value setting window and enter an appropriate time interval in the window. For example, if you enter "60000", it means that the shared printer will be sent to the local network every 1 minute. Send status information or task list information once. After the settings are complete, click OK and press the F5 function key on the keyboard to refresh the system registry. The above settings will take effect. With this setting, the print speed will naturally be faster.
Six, spray plug repair can be very simple
Jet plugging is a problem that often occurs during use, but many people will complicate simple issues and make maintenance more difficult. The following small series describes a simple and safe method:
First, prepare a set of discarded ink cartridges, buckle the top of the discarded ink cartridges, remove the sponge inside, and clean the ink cartridges, then re-glue them to the ink cartridges with 2/3 of the original top. When the ink cartridge is clogged, the ink cartridge is changed to the position of the blocked color, and pure water, or alcohol and other special cleaning solutions are injected into the ink cartridge for several hours. The time can be controlled according to the degree of clogging, and it can be repeatedly operated in the middle of the entire process. The water in the cartridge cannot be dried up. If you replace the chip on the cartridge, use a cleaning program that works better.