Heating temperature depends on different conditions, generally between 100 °C -200 °C, the effect of many experiments to select the best parameters; after printing, if you use a heating furnace to reheat a time will make the printing effect is better, it is recommended 3 - 30 seconds. Because the influencing factors are very complex and sensitive, whether or not heating is required before and after printing, the heating temperature and the heating time are subject to the user's own test according to the details.
Immediately after extrusion, hot stamping, or printing after heating, or heating after printing;
Silicone gravure inks are suitable for contact-type concave wheel printing, offset printing, and flexographic printing. It is recommended to print on a dry clean media surface (eg, when the media surface contains water, use a hot gas to dry the media surface to allow better adhesion of the ink to the media surface.
Immediately after extrusion, hot stamping, or printing after heating, or heating after printing;
Silicone gravure inks are suitable for contact-type concave wheel printing, offset printing, and flexographic printing. It is recommended to print on a dry clean media surface (eg, when the media surface contains water, use a hot gas to dry the media surface to allow better adhesion of the ink to the media surface.
Foshan Hollin Furniture Co.,Ltd , https://www.china-hollin.com