Shanghai Shuangfei Company Successfully Developed Automatic Paper Cutlery Trimming Machine

In the paper pulp molded tableware production industry, the current trimming machines are mostly hydraulic pressure die cutting machines, and the trimming frequency is 5-6 times per minute. With this process, the blades are easily damaged and require frequent tool changes. When a new blade is used, there is often a side thread attached to the knife edge. After a period of time, the smoothness of the product periphery is greatly reduced, especially the safety is greatly reduced, and workers often cut off their fingers. Some trimmers are externally charged, as they are also pressed. In addition to the improvement in safety, the trimming effect has not improved. There is also a kind of trimming machine in China, which adopts the continuous cutting method. Although the trimming speed is greatly accelerated, but the blade is not changed and the slider is still there, there will always be a phenomenon of breaking the filament, and the service life of the blade is not long. The biggest drawback is the product. During the hobbing process, the center will be squeezed off, resulting in asymmetric and uneven trimming. Above cutting edge method, Shanghai Shuangfei Company has practiced.
With the rising demand for global environmental protection, the paper mold and cutlery industry is developing rapidly, and the number of export products is also increasing. The industry urgently needs a cutting machine with high cutting speed, good effect and safe use. Under this circumstance, Shanghai Shuangfei New Technology Development Co., Ltd., an innovative developer of paper pulp molded tableware equipment, successfully designed a new automatic paper tableware cutting machine with a new concept.
The machine adopts the punching process with high processing requirements, pneumatically and artificially assists the external feeding, and then automatically feeds, die-cuts and discharges the material at one go. The cutting frequency is 15 to 20 times per minute (depending on the size of the product), which is 3 to 4 times the cutting frequency of the traditional hydraulic pressure die cutting machine. The trimming effect is smooth and agile. The tool has a long service life, and the four sides have good uniformity and are safe to use. The entire machine is small and exquisite, controlled by a Japanese Mitsubishi PLC. After the successful trial production of Shuangfei Company, after three months of use by users, it reflected well and reached export export standards.
Shanghai Shuangfei New Technology Development Co., Ltd. is the only high-tech enterprise in China that can simultaneously design and manufacture new types of national standards, five kinds of four categories of environmental protection tableware, complete sets of equipment, they can also provide for plant fiber, edible powder tableware production enterprises Automatic die cutting, polishing machine.