Technical Parameter Introduction of Shanghai Qiaofeng Brand Small Spray Dryer

Product description of small spray dryer:

QFN-6000Y small spray dryer (small spray dryer / small spray dryer) and it is mainly suitable for the production of trace particles in universities, research institutes and food, pharmaceutical and chemical enterprise laboratories, for all solutions such as emulsions and suspensions It has broad-spectrum applicability and is suitable for drying heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc. Because the sprayed material is only subjected to high temperature when sprayed into mist-sized particles, it is only heated momentarily. It can keep these active materials from being damaged after drying.

Main features of small spray dryer

● Original imported nozzle, high efficiency.

● Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency.

● Fully automatic control: one-button start-up, after setting the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts automatically, the running animation is displayed on the touch screen, the running process is clearly displayed; just press the stop button when shutting down, the machine will automatically shut down safely .

● Manual control: if you need to adjust the process parameters during the experiment, you can easily switch to the manual state, and the color touch screen dynamic display (animation) throughout the experiment

● Equipped with nozzle cleaner (through needle), when the nozzle is blocked, it will be automatically cleared, and the frequency of the needle can be adjusted automatically.

● Shutdown protection function: Just press the stop button when shutting down, the machine will stop running except for the fan, to ensure that the equipment will not burn out due to misoperation (forced shutdown of the fan).

● The spraying, drying and collecting systems are made of transparent high-quality borosilicate heat-resistant glass materials, so that the drying process can be carried out in a non-polluting environment.

● Built-in imported oil-free air compressor, the particle diameter of the powder spray is normally distributed, the fluidity is very good, the noise is very low, less than 60db.

● The atomization structure of the two-fluid spray, the whole machine is made of high-quality stainless steel material, compact design, no additional equipment.

● The design of dry temperature control adopts real-time control PID constant temperature control technology, so that the temperature control in the whole temperature zone is accurate, and the heating temperature control accuracy is ± 1 ℃.

● In order to keep the sample pure, equipped with air inlet filter.

● The feeding volume can be adjusted by feeding peristaltic pump, the minimum sample volume can reach 50ml.

● The particle size of the finished dry powder after drying is relatively uniform, and more than 95% of the dry powder is in the same particle size range.

● For the sticky materials, there is a nozzle cleaner (through needle), which will be automatically cleared when the nozzle is blocked, and the frequency of the needle can be adjusted automatically.

● Innovative tower wall purge device, the material recovery rate is higher.

Technical parameters of small spray dryer

â—† The product has passed the EU CE certification

◆ Inlet air temperature control: 30 ℃ ~ 300 ℃

◆ Outlet temperature control: 30 ℃ ~ 140 ℃

â—† Evaporated water: 1500mL / H ~ 2000ml / h

â—† Maximum feeding amount: the maximum is 2000ml / h (adjustable)

â—† Feeding method: peristaltic pump adjustment

â—† Minimum feed volume: 50mL

◆ Temperature control accuracy: ± 1 ℃

◆ Average drying time: 1.0 ~ 1.5S

â—† Complete power: 3KW / 220V

◆ Dimensions: 1200mm (height) × 650mm (length) × 500mm (width)

Baking Tools

Cake Decorating Tools,Baking Tools,Baking Utensils,Cake Baking Utensils

Yangjiang Yado Kitchen Industry Co., Ltd. ,