Lin Pin Instrument tells you the entry knowledge of salt spray test box

<p> Brief introduction of salt spray test chamber: The salt spray test is aimed at the surface plating of various materials, anodizing, spraying, anti-corrosion treatment of anti-rust oil, and testing the corrosion resistance of products.

Characteristics of salt spray test chamber:

1: The entire PVC board adopts advanced production technology. The three-dimensional reinforced ring has a solid structure, no deformation, acid and alkali resistance, and high temperature resistance without aging. It is suitable for salt spray, copper acetate and other test specifications.

2: The control instruments are all on the same panel, the operation is simple and easy, and it is clear at a glance.

3: Automatic and manual water addition system, water shortage, with automatic water replenishment function, non-stop during the test. Automatically alarm when water is scarce to ensure safe use.

4: The precision glass nozzle (heat-resistant glass) is made of special glass. The mist is evenly dispersed and naturally falls on the test piece. It is used continuously for 4000 hours to ensure that there is no crystallization salt blockage.

5: Double over temperature protection function, over temperature alarm display, and cut off the heater power to ensure safe use.

6: Imported temperature control digital display device, using PID control, error 0.1 ℃.

7: Using steam direct heating, the heating speed is fast and uniform, and the standby time is reduced. The highly corrosion-resistant titanium tube is used to make the heating tube.

8: Conical diffuser spray tower, with functions of guiding mist, adjusting mist volume and evenly falling mist.

Salt spray series.jpg

9: Use the saturated air barrel of Henry's Law to enjoy, heat and humidify it, and provide the necessary indoor humidity. The material SUS # 304 stainless steel has the best thermal insulation effect, with a visual transmission device and a drain switch to observe the water level and cleanliness of the saturated air bucket.

10: Automatic defogging device, can clearly observe the sample in the laboratory.

11: Mist seals the water tank, using the water sealing method to check the mist leak.

12: The test sealing cover is an A-grade acrylic impact resistant plate imported from Europe, with a thickness of 5MM, which is easy to operate, safe and reliable.

13: Imported digital display timer is adopted, and the timing is accurate. Any desired test time can be set in sections, and the adjustable time range is from 0.01 seconds to 9999 hours.

14: Refill bottle of test drug made of hidden water level perspective window is easy to clean and should not be broken.

15: The laboratory basket rack adopts a plane indexing rack, and the angle can be adjusted at will. The directions of falling and receiving fog are the same on all four sides, and the number of test pieces is large. Applied international RELATEU STANDARDS CNS 3627, 3885, 4159, 7669, 8866; JIS D-0201, H-8502, H-8610, K-5400, Z-2371, ISO3768, 3769, 3770; ASTM B-117, ASTM B -268B, -268, GB-T2423, GJB150.

The salt spray test is divided into three categories: neutral salt spray test (NSS test), acetate salt spray test (ASS test), copper salt accelerated acetate salt spray test (CASS test), forest frequency instrument tells you the salt spray test box Getting started

1 1

Long Handle Advertising Umbrella

Creative Multifunctional Advertising Umbrella,New Purple Advertising Umbrella,New Long Handle Advertising Umbrella,Long Handle Advertising Umbrellas

Dongguan City Diadia Industry Co.,Ltd , https://www.diadiabag.com