Polyethylene Terephthalate (PET)
PET is one of several of resins in the polyester family. The major raw materials used to manufacture PET bottles include ethylene glycol, terephthalic acid or dimethyl terephthalate and small quantities of additives such as catalyst and stabalizers. Bottles made from PET are injection blow moldsed, unoriented Or they have lightweight and safe compared to glass (no breakage on filling lines, in transit, retail stores and In applications.) Each application should be tested to ensure that the product is compatible with the container.
High Density Polyethylene (HDPE)
HDPE is the most widely used resin for plastic bottles. This material is economical, impact resistant, compatible with a wide range of products (including acids and caustics) and provides a good moisture barrier. It is usually supplied in FDA approved food grade. When Fluorine-containing, HDPE becomes an effective package for solvents (aromatic hydrocarbins) and oxygen sensitive extracts. HDPE is naturally translucent and flexible. The addition of color will make HDPE opaque although not glossy. Adding extra weight to the bottle will yield a rigid container. HDPE is supplied surface-treated on a stock basis and lends itself readily to silkscreen decoration. While HDPE provides very good protection at solvents below freezing, it cannot be used with products filled at over 180?F or products requiring a hermetic seal.
Vinyl / Polyvinyl Chloride (PVC)
PVC is naturally clear, has extremely good resistance to oils and very low oxygen transmission. It provides an excellent barrier to most gases, but is vulnerable to solvents. PVC is a semi-rigid material which, when produced on extruded blow-molding equipment, Can appreciated managed designs. Improvements in resin have increased oxygen barrier properties and chemical resistance, with a 20-30% improvement in drop impact resistance. PVC exhibits low temperature resistance and will distort at 160?F. It is not compatible with hot filled Products. Because it provides a good oxygen barrier, PVC is an excellent choice for salad oil, mineral oil, and vinegar. It is also commonly used for shampoos and cosmetic products.
Low Density Polyethylene (LDPE)
LDPE is similar to HDPE in composition. It is less rigid and generally less chemically resistant than HDPE, but is more translucent. LDPE is used more primarily than HDPE, but will yield a glossy bottle when produced in Colors.
Polypropylene (PP)
Polypropylene is a naturally translucent material which provides contact clarity and an excellent moisture barrier. One major advantage of polypropylene is its stability at high temperatures (maximum temperature = 230-260F); it is autoclavable and offers the potential for fluid sterilization. PP's compatibility with High filling temperatures is responsible for its use with hot fill products such as pancake syrup. PP has an excellent chemical resistance, but provides poor impact resistance in sub-freezing temperatures. Produced in color, PP exhibits a glossy finish.
Polystyrene (PS)
Styrene offers excellent clarity and stiffness at an economical cost. It is commonly used with dry products including vitamins, petroleum jellies and spices. It can be screen printed without being flame treated and exhibits poor impact resistance. It can be screen printed without being flame treated and lends Itself well to offset printing.
Other
Abbreviation of plastic material
LDPE -
Low Density Polyethylene
HDPE -
High Density Polyethylene
PP -
Polypropylene
PVC -
Rigid Polyvinyl Chloride
PET & PET-G -
Polyester & Co-Polyester
SAN -
Styrene Acrylonitrile
PS -
Polystyrene
PC-
Polycarbonate
PU-
Polyurethane
PETG-
Polyethylene Terephthalate Glycol
EVA-
Ethylene Vinyl Acetate
PC-
Polycarbonate
AN
Acrylonitrile
Arm & Elbow Brace applies pressure over tendons to help relieve painful elbow problem
Arm & Elbow Sleeve which retains body heat to stimulate blood flow and accelerate healing.
Arm & Elbow Pads can resist outside impact and provide excellent protection for the elbow. Provides controlled joint support for weakened of injured wrist
Arm & Elbow Support prevents your elbow from scratching. Maintain joint for people with aches, pain, and sprains.
Arm & Elbow support sleeve good workmanship, breathable, can effectively prevent injury of leg and muscle. It's best choose when you are doing sports.
Arm & Elbow compression sleeve provides support to help relieve joint and muscular pain. It aids in muscle recovery and sport performance.
Gentle effective compression allows for daily use.
Naturally anti-bacterial and anti-odor
Arm & Elbow Brace,Arm & Elbow Pads, Arm & Elbow Support, Arm & Elbow Sleeve, Arm & Elbow Guard, Arm & Elbow Wraps
Shijiazhuang AoFeiTe Medical Devices Co., Ltd. , https://www.aofit.com