[ Chinese wardrobe network ] Economic development, social progress, led to the improvement of people's living standards, custom wardrobes came into being. The most important thing about the wardrobe is the design of the cabinet. The wardrobe back panel is also part of the wardrobe. This is an inconspicuous part, but it plays a vital role in the whole wardrobe.
Under normal circumstances, the closet is placed in the home space, which is standing against the wall, so the largest contact area with the wall is actually the wardrobe back. Looking at the current custom wardrobe products, the cabinets are usually made up of five whole boards, which are a single board directly nailed to the two side panels.
The reason why the backboard is important is that it plays a certain degree of moisture-proof, anti-mildew effect, and different thicknesses have different effects on the overall wardrobe. The thickness of the overall wardrobe backboard is commonly used in three thicknesses: 5MM, 9MM, and 18MM. The following is a comparison of the thickness of the back panel, moisture, and stability to analyze the thickness of the overall wardrobe back panel.
1, 5MM thickness
Gap: Use a 5mm overall wardrobe back panel to leave a lot of space, which is why many consumers or businesses choose 5mm backplane. However, the thickness of the 5mm backing plate is always too thin. Whether it is the slotting of the back panel of the wardrobe or the stability of the overall product, the 5mm backboard cannot fully exert the performance of the wardrobe.
Moisture-proof: The 5mm-thick wardrobe backboard can basically meet the moisture-proof performance. Although the moisture will not be directly immersed, if it encounters a long period of severe rainy season, it will still cause certain damage to the moisture resistance of the board. Many consumers will choose a 9mm wardrobe back panel.
Stable: 5mm wardrobe back panel stability, if it is a large wardrobe, the length is between 1000mm-2000mm, for the stability, the backboard is less stressed and less likely to be deformed. If the length of the wardrobe is greater than 2000mm, the corresponding force of the backboard is too large, and the 5mm backboard is more easily deformed, and the backing is more likely to break.
2, 9MM thickness
Gap: 9mm back plate is the common thickness size of custom closet, because in the gap processing, the thickness of 9mm back plate is more suitable for slotting, and the effect of leaving the gap with the wall is very good, and the wardrobe space occupied by the backboard It will not be very large, which will help to leave a gap between the backboard and the wall to make the moisture resistance better.
Moisture-proof: The overall wardrobe back panel with a thickness of 9mm can be used for moisture-proof work in the space of the saved space, so that the backboard is more secure, and the gap is properly reserved. The appropriate moisture-proof cotton can be added in the middle. The wardrobe back panel is more resistant to moisture.
Stable: The load-bearing weight of the 9mm-thick wardrobe backboard is sufficient to support the gravity of the top cabinet and each laminate. It not only ensures the stability of the wardrobe, but also reserves more space for the wardrobe to not protrude and does not cause the wardrobe. The use area is smaller, and the like, and it is more suitable for the overall wardrobe with a larger width, and the effect is further exerted, so that the entire wardrobe becomes extremely strong.
Hair Curved Scissors,Baber Scissors Set,Customized Professional Scissors,Custom Salon Hair Scissors
Zhangjiagang Mister Tools Co., Ltd , https://www.msscissors.com