Amusement equipment maintenance method

[Company Sports Equipment Co., Ltd. official website news] You are really good, back to the company's official website, thank you for the high value of the face, but also to read Xiaobian articles, hoping to get your resonance and inspiration! The company's brand amusement equipment and children's slides: suitable for playgrounds, parks, kindergartens, communities, shopping malls and other indoor and outdoor places, set fitness and entertainment in one, to bring children a different experience!

游乐设备维护保养方法

How to maintain the amusement equipment? This is a bigger problem faced by amusement equipment operators. Now Xiaobian will introduce a method for maintaining and maintaining downstream music equipment.

First, the plastic part and glass fiber, available soapy water, disinfectant detergent, bleach and other diluted soaking, scrub with a soft cloth or soft brush, then rinse with water, dry with a clean cloth or dried. Finally disinfect with 84 disinfectant spray.

Second, the soft sponge part can be scrubbed with soapy water with a soft cloth, or placed in the sun exposure sterilization.

Third, moisture-resistant, heat-resistant, do not fade the wooden part, can be washed with soap bubbles, dried, and then disinfected with 84 disinfectant spray.

Fourth, the metal part If you want to rust, you can use a brush to brush floating rust, wipe with a dry cloth; after the sun exposure, you can buy colorless Sanhe brand from the spray paint about 20 cm away, while sweeping spray again Spray it once again to protect it. After the paint is dry, it is cleaned, dried and disinfected.

Fifth, when the electrical parts of the circuit are cleaned, first of all, it is necessary to ensure that the power is turned off and watering is prohibited. Generally, scrubbing is performed with a damp cloth, and then the power supply is connected after the dryness.

6. All amusement equipment, open-air slides, and drill-pipe parts should not have accumulated water after the rain. If there is, a hole with a diameter of 4 mm should be drilled at the lowest point.

Seven, if it is an indoor activity room, ground, walls, etc., daily ultraviolet radiation disinfection, indoor ventilation should be often. Disinfect once a week with hydrogen peroxide.

8. Of course, at the same time, disinfection must also check whether the connection part is firm, whether the metal is frequently connected to the refueling parts, circuit electrical parts and common parts.

游乐设备维护保养方法

In this small series to remind consumers, before taking rides, be sure to do "four look":

A look at the attractions for people. Whether the ride is suitable for your physical condition, understand the requirements of the facilities for age or certain diseases, and choose suitable rides for your consumption.

Second, look at the passengers' instructions. Learn about the sporting features, instructions for use, safety instructions, and warnings of your ride. Listen carefully to the safety knowledge and safety instructions provided by the staff, and ask questions in a timely manner if they are not clear.

Three look at security signs. Check whether the equipment has a safety inspection certificate and within the validity period of the inspection. Do not use rides without a registration certificate or regular inspection reports.

Look at the safety device. To see if safety devices (such as seat belts, safety bars, etc.) are complete and effective. If there is a safety device that is not complete or cannot be used normally, you must refuse to ride or play.

At the same time, consumers should be careful not to take children to ride in more dangerous amusement facilities; when they ride, they must obey the arrangements of the management personnel and consciously fasten the safety protection devices such as seat belts, and cooperate with the safety protection measures; after the amusement facilities are turned on, Don't panic about the problem. Obey the command of the staff and avoid causing unnecessary harm. If any unlicensed or non-safety-tested amusement facilities are found to promptly report, facilitate investigation by relevant departments to ensure the safety of other consumers; for example, at the business site. A security incident occurred within the facility. Attention should be paid to the on-site evidence for future complaints.

Children's slide manufacturers - the company's pleasure

儿童滑梯厂家

For more information, please return to the company's official website of Sports Equipment Co., Ltd. Advisory telephone. The company's pleasure and dedication to serve you! Factory address: No. 16, Chuangqiang Road, Lucheng District, Wenzhou City Light Industry Park.

Lighter supporting facilities

Lighter supporting facilities, lighter air pump, air pump, water tower, fire-fighting facilities, lighter factory, lighter manufacturer, lighter manufacturer, lighter wholesaler, lighter craft, lighter manufacturing san'jianLighter supporting facilities, lighter air pump, air pump, water tower, fire-fighting facilities, lighter factory, lighter manufacturer, lighter manufacturer, lighter wholesaler, lighter craft, lighter manufacturing san'jian

Lighter Flame Adjusting Machine,Lighter Equipment,Llighter Production Equipment,Lighter Supporting Equipment,Lighter Machine

Hunan Feituo Automation Technology Co., Ltd. , https://www.feetoolighter.com