Nowadays, almost every household has a toilet installed. The toilet is the necessary sanitary equipment in our home, but in our daily life, we often encounter the situation that the toilet is blocked. Many people will encounter this problem. So I will have a headache, I don’t know what to do, then what should I do if the toilet is blocked ? What are the precautions for the installation of the toilet?
First, what should I do if the toilet is blocked?
1. Go to the hardware store and buy a soft hook for the purpose of dredging the pipe. You can hook up the blockage.
2, accidentally dropped into plastic brushes, caps, soap, combs and other hard objects. This kind of clogging can be directly used to directly clear the pipe dredging machine or simple dredger. In severe cases, the toilet must be dismantled. This situation can only be solved by simply getting things out.
3, many times the toilet flushes, you will pass, especially if it is soluble in soil or paper, or can be broken up. If it is greasy, then wash it with a pot of boiling water.
4, after the sewer is used for a period of time, the hair that is usually bathed in the tube will accumulate on the wall and accumulate more, which will cause blockage. The hair will generally cause the floor drain of the bathroom to be blocked, the wash basin is blocked, the bathtub is blocked, and the shower room is blocked. Therefore, when you use it, you must cover the cover and other protective facilities. If you have hair, you can pick it up and throw it into the trash can.
5, the toilet is used for a long time, it will inevitably be fouled on the inner wall. In severe cases, it will block the air outlet of the toilet and cause the toilet to be slow. The solution is to find the vent hole to scrape the dirt and let the toilet water flow smoothly. .
6. Use a relatively long plastic water pipe, one end to tap the water, one end into the toilet seat, then plug the toilet seat with a rag or something, and then open the tap water, which will use the water pressure to clear the pipe.
Second, the toilet installation precautions
1. Quantitative pit distance. When the equipment is flushed, it must be measured by the pit distance. The pit distance refers to the interval between the base of the sewer and the wall behind the tank. The error cannot exceed 1 cm, otherwise the equipment will not be available.
2. When the equipment is in the toilet, it should be noted that it is not allowed to inject cement sand into the front cavity or other cavity of the toilet, so that the concrete is condensed and expanded to crack the toilet.
3, pay attention to the height of the water seal at the bottom of the toilet, too low may form the bathroom back taste, affecting health; too high, simply splash it, it must be determined according to the height of their needs.
If the toilet in your home is blocked, you must not panic. You need to find out the cause of the blockage of the toilet first, and then clear the problem for different situations. The problem will be solved. The above is how the small toilet for everyone introduced the toilet is blocked? Flush toilet installation precautions, I hope to help everyone, if you want to know more about the decoration information, please continue to pay attention to the decoration home network.
Paper Towel,Hand Paper Towel,Bulk Paper Towel,Wholesale Paper Towel
DONGGUAN YEE HUP TRADING CO,.LTD , https://www.dgyeehupack.com