The printing process is one of the important factors influencing the design of PVC label specifications. Due to the uneven basic thickness and poor flatness of the substrate PVC used for printing, it brings a lot of difficulties to printing. In order to avoid the production of defective products, the following points should be noted.
1. Avoid lines thinner than 0.1mm.
2. Avoid riding color words (that is, anti-white characters consist of two colors). In this case, a black border or other color border is added with the permission of the customer. But the width of the side line is greater than 0.25 ~ 0.3mm.
3. For line and color register, the line width is generally not less than 0.3mm, and the color is expanded to the middle of the line.
4. In case of overlapping colors of three colors or more, try to modify to two colors and spot colors.
5. It is best to use spot colors for large-area background colors, avoid printing with color separations, which are likely to cause color differences, especially blue and yellow, red and yellow.
6. In any case, the minimum critical value is 20%.
7. The reverse white border of the text is generally bolded to about 0.3mm.
8. The depth of the special green version, special purple version, pearlescent version, matt version, and white version must be greater than 45μm.
9. For the yellow version, it can be screened or edge blurred when needed, for example, when the yellow, red, and hollowed-out characters or yellow and red are used to overlay the text.
10. The bar code is generally perpendicular to the horizontal direction, that is, placed vertically, to prevent deformation or contraction caused by unrecognized or misread when contracted.
11. The bar code is generally more than 5mm away from the palm to prevent shrinkage and deformation.
12. When the white version is expanded and contracted, it can be expanded and contracted by 0.3mm from top to bottom, and 0.4mm from left to right.
13. Try to avoid the reverse expansion of gold characters, silver characters and colors, which will give people the feeling of dirty edges.
14. Avoid using the gold and silver version as the transition network, its transition effect is not obvious.
15. When arranging the color sequence, in addition to adhering to the principle that the three primary colors of C, M, and Y are put together, you must also pay attention to the closer the two colors, the more difficult the color matching is.
16. Where there are less than 10% of the dots in the electrical sub-graph, all the dots below 10% cannot be transferred.
17. When it is difficult to register, the horizontal pattern should not exceed 2 pieces or the width of the film door should not exceed 600mm. When the width of the PVC film exceeds 650mm, its thickness and straightness are more difficult to control, which often leads to many defects. , Causing difficulties in printing.
18. When printing portraits, the printed substrate is preferably newly produced, with fewer missing dots, because there is no precipitation of additives on the surface of the newly produced film.
19. Relevant words, barcodes, marks, and trademarks must comply with relevant national regulations.
20. The position of the effective picture and text is generally controlled within the tolerance x2-2mm under the folding diameter, so as not to be covered when the palm is closed.
The sprinkler truck is also known as the spraying car, multifunctional sprinkler, landscaping sprinkler, water tankers, water bowser ,water tank truck ,water truck .The sprinkler is suitable for various pavement washing, trees, green belt, green lawn, roads, construction of factories and mines, high-altitude construction flushing. With water, dust, high, low spray, pesticide spraying, rail and other functions, but also has the function of water transport, water drainage, emergency fire and so on.
CLW GROUP TRUCK Spraying car, also known as multifunctional green sprinkler. For urban road, large plant, army, garden and other units of clean pavement, hygiene, dust, water, spraying pesticides, etc., in order to achieve the role of landscaping.
At the same time can be used for temporary emergency fire sprinkler, each sprinkler is equipped with fire special interface.
Driven by the engine gearbox, gearbox mounted power take-off drive sprinkler pumps, sprinkler pump produces the main driving force, inside the tank of liquid spray out through the network. Self suction height: less than or equal to 7m, sprinkler width: is equal to or more than 20m, maximum range: greater than or equal to 28m; adjusting the pillars, the range is more than or equal to 28m; also can adjust into fog, with a range of more than or equal to 5M.
Before the spray, sprinkle is arranged in front of the duck shaped nozzle or round blunt mouth, mounted behind the open sprinkler nozzle or shower nozzle of cylinder, at the back of the work platform, equipped with water cannons. The rear can also be arranged 8 nozzles (optional) sprinkler is generally used to wash the streets.
CLW GROUP TRUCK Tank production
The production process of automatic production line is divided into: feeding, automatic welding, head spinning forming, the body of a rolling molding and other advanced production processes. The tank material uses high quality carbon steel plate production. Special use cases can also be based on the needs of customers using 304 stainless steel. Tank volume is 4 cubic meters, 5 cubic meters, 6 cubic meters, 8 cubic meters, 10 cubic meters, 13 cubic meters, 15 cubic meters, etc..
Piping system
The pipeline, four three-way ball valve, through the ball valve, filter net, a water outlet (pediment sprinkle, side spray; high side of the shower; work platform with green sprinkler gun).
operating system
Mainly by the engine drive gearbox, gear box on the installation of power driven pump, sprinkler pump, the power of the tank, the liquid inside the tank through the pipe network. Scope of work: from the ceiling height: is equal to or more than 7m, sprinkler width: greater than or equal to 14m, maximum range: greater than or equal to 28m; adjusting the pillars, the range is more than or equal to 28m; also can be adjusted into a mist, with a range of more than or equal to 5M.
Sprinkling pump
CLW GROUP TRUCK Equipped with sprinkler, green spray vehicles high power special sprinkling pump (Weilong pump) and fire joint, with gravity flow valve, with self suction function.
Can be optional configuration: can be installed onto the medicine wheel, drug pumps, tank corrosion and rust, multi-faceted import and joint water, electromagnetic valve, gas dynamic valve and other advanced facilities, to meet the needs of different users.
Cab
The truck cab have one row or double row type , also known as the long head of the cab, the cab short head.
Force taking device
The general sprinkler by Dongfeng, Liberation Series PTO, gas operated, switch operation pulls back force taking gear in meshing position, through the drive shaft drives the pump work, the switch forwards a return, the pump is stopped. Force taking device is installed in the watering car gearbox body side of the equipment, automobile gearbox in general have the installation port and installed on the power device can be through the transmission constant mesh gear rotation to transmit the power out, and then through the driving component and controller to transmit power to the drum pay mix car, and pressure pump
CLW GROUP TRUCK Sprinkler function description:
Sprinkler with duck shaped nozzle or round blunt mouth, mounted behind the open sprinkler nozzle or shower nozzle of cylinder, at the back of the work platform, equipped with water cannons. The rear can also be arranged 8 nozzles (optional).
Sprinkler is generally used to wash the streets, dust and cooling, the sprinkler can be by adjusting the thread of the nozzle change direction and angle of sprinkler spray, water antiaircraft gun can be used for urban and rural landscape and emergency fire. Lotus mouth can be watered down the middle of the road dust sprinkler rushed up, play a role of air cleaning.
Water Tank Truck,Water Sprinkler Truck,Water Sprinkler Vehicles,Stainless Steel Water Truck,Dongfeng Water Truck,Mini Water Truck,Water Spray Truck,Water Tanker Transport Truck
CLW GROUP TRUCK , https://www.clwgrouptruck.net