basic introduction
The desktop centrifuge is a routine laboratory centrifuge, widely used in research, education and production departments of biology, chemistry, medicine, etc. The high-speed desktop centrifuge has a maximum speed of 10000R/MIN, which is suitable for rapid separation and synthesis of trace samples, such as nucleic acid hybridization.
Detailed introduction of high speed centrifuge
Product introduction:
The desktop centrifuge is a routine laboratory centrifuge, widely used in research, education and production departments of biology, chemistry, medicine, etc. The high-speed desktop centrifuge has a maximum speed of 10000R/MIN, which is suitable for rapid separation and synthesis of trace samples, such as nucleic acid hybridization.
Third, safety instructions
1. If the power indicator light is off when the power is turned on, stop the machine immediately.
2. It is strictly forbidden to run without load when the rotor is not installed.
3. Check the rotor for corrosion damage before running.
4. Do not open the centrifuge cover while the rotor is running. Do not touch the running rotor.
5. It is strictly forbidden to operate the rotor under unbalanced loading conditions.
Fourth, the use of instructions:
1. The table of the centrifuge should be flat and sturdy. The workroom is neat, clean and well ventilated.
2. Press the lock button to open the lid. Turn on the external power supply, close the power switch, and the indicator light is on.
3. Turn off the power switch.
4. Open the centrifuge cover and wipe the inner cavity and rotor.
5. Load a test tube with the same weighing.
6. Close the centrifuge cover.
7. Set the timing.
8. Close the power switch.
9. Adjust the speed control knob to the desired speed.
10. Before the stop, the high-speed knob must be set to the minimum position “Timer†set to “Zeroâ€. Turn off the power switch to cut off the power.
11. Wipe the inner cavity and the rotor and close the centrifuge cover.
V. Maintenance and maintenance:
1. Do not place anything on the centrifuge cover. After each use, be sure to clean the inner cavity and rotor, and cover the centrifuge cover to prevent dust and dirt from entering.
2. If the centrifuge is not used for a long time, open the centrifuge cover for a period of time and dry the inner cavity.
3. After the motor's carbon brush is used for 3,000 hours, it should be replaced in time to avoid wearing the commutator.
After long-term use of the centrifuge, natural wear is a normal phenomenon. After one year of use, if there is a failure or a problem, the company will continue to provide quality services to assist in handling.
Dear Customer:
Thank you for your interest in Shanghai Jiapeng's products. In addition to this product introduction, the company also has three kinds of UV analysis, nucleic acid protein detector, gel imaging analysis system, photochemical reactor, constant current pump, automatic partial collector, etc. Introduction, if you are interested in Shanghai Jiapeng products, please contact us. Thank you!
We are committed to providing high quality and durable products, functionality and dependability are achievable without drastically higher prices. Eco-friendly SUS 304 stainless steel single handle Kitchen Faucets, complied with lead-free regulation. Various styles are available for your choice which is widely use in hotels, villas, apartments, restaurants and other places.
Single Handle Kitchen Faucets,Brass Kitchen Faucet,Brass Kitchen Tap,Handle Kitchen Faucets
Kaiping Yufa Sanitary Ware Co.,ltd , https://www.yufafaucet.com