Paper packaging cushion manufacturing method

Patent name A method for manufacturing a paper packaging mat Patent applicant Zhang Jianqing Principal applicant Address 311400, Room 501, No. 20, Jiaodun, Fuyang Town, Fuyang City, Zhejiang Province Inventor Zhang Jianqing Application (Patent) No. 200410048609.2 Date of application 2004.06.02 Approval of certification date Announcement No. 1584207 Approved Announcement Date 2005.02.23 Manual CD No. D0508 Main Classification No. D21J3/00 Classification No. D21J3/00; D21H21/28;//D21H17:00 Division Original Application No. Priority Item Abstract A kind of paper packaging pad In the manufacturing method, it selects waste paper, puts it into a paper shredder, grinds it into a slurry, and heats the shredded paper, then rinses it with clean water for at least 20 minutes, and then feeds it into the beater while beating. Rinse and rinse, then press at least 100 kilograms of waste paper to match the ratio of 0.8 kilograms of dye. Put the aniline acid directly in green or the aniline acid directly in the yellow dye slowly into the pulper, while beating, while coloring for at least 10 minutes, The slurried pulp is sent to the concentrator and concentrated to at least 25% of the pulp, and put into a cavity of a special mold, and the pressure is filtered to remove water. , And it can be dry, it has a simple manufacturing process, low production costs, the product is not only good fastness, and elasticity is better than the original foam pad, can be recycled and reused, does not pollute the environment and other characteristics, sovereignty 1, a paper The method for manufacturing the packaging mat, which selects the waste paper, puts it into a shredder to grind it into a slurry, and heats the shredded paper at the same time, then rinsing with clean water for at least 20 minutes, and then feeding it into the beater While battering, rinse with water, and then mix at least 100 kg of waste paper with a ratio of 0.8 kg of dye. Slowly spread the acidity of the aniline directly to the aniline or acidity. The yellow dye is slowly dispersed into the beater, while beating, while coloring at least. 10 minutes, the slurry will be sent into the concentrator concentration to the pulp slurry at least 25% or more, into a mold cavity of a special mold, the above pressure filtered to form water, and dried.