1. The relationship with the surrounding environment should be considered; the first and second level biosafety laboratories do not need special site selection, and can share common buildings, preferably on one section or one side of the building. Can be communicated with other parts, but should be separated by a sealed door with controllable access, and there are settings to prevent insects and rodents from entering (microbial and chemical separation); it should be implemented in accordance with "General Requirements for Biosafety"
2. The technical requirements of the testing project carried out should be considered. Carry out pathogenic bacteria detection, should be equipped with biological safety cabinet 3, effective isolation in different areas (pathogenic bacteria detection), to prevent cross-contamination
Generally divided into the following areas: sample receiving room, sample storage room, medium preparation room, sterile room, culture room, instrument room, identification room, scrubbing and disinfection room (each area should be equipped with ultraviolet disinfection and other air disinfection devices), in addition, There should also be data processing and data storage rooms and offices. Minimize round trips and roundabouts; the scrubbing and disinfection room should be far from the experimental operation area
4. Water, electricity and ventilation conditions should be considered in the design
5. The light in the experimental operation area should reach a certain illuminance, 540lx. It should not be operated in direct sunlight. Stored sample
The area of ​​products and reagents should also be protected from sunlight.
Stainless Leveler Feet,Stainless Adjustable Feet,Stainless Leveling Feet,Stainless Steel Adjustable Leveling Feet
Cixi Ruixin Machine Components Co., Ltd , https://www.adjustlevelingfeet.com