How to use treadmill safety key chain? How to cancel?

How to use treadmill safety key chain? How to cancel? "The key to the treadmill" may be relatively unfamiliar to the average friend. As for the friend who used the treadmill, he must know its effect. So today, this article, the veteran skips it; the so-called treadmill key is one to prevent you from The device on the treadmill to fall over or slide on; however, for a friend who is familiar with the treadmill, the security key is optional, so if you do not need a treadmill security key, you can adjust the treadmill to not use the security key. of! 0049evycty6krobz2lg62690

How to use treadmill safety key chain?

Releasing the treadmill safety key to the length that your normal running will not affect, and then clip the safety clip on the clothes, be careful not to affect your running, so that even if you wear well; if you carelessly Sliding on a treadmill or taking a fall will remove the security key, and the treadmill will stop and play a protective role.

How to cancel the treadmill safety key chain?

However, for a friend who is skilled in exercising on a treadmill, the role of a security keychain is not great. How can I cancel it?

The first step is to check the treadmill dashboard to see how it is designed to open.

Most models have screws inserted from the bottom of the dashboard. Remove the screws and place them in a safe place that can be reassembled. The lid can now be freely removed. But notice that when you take it out, because there is still wiring and two parts connected, you need to unlock them. Remove the lid and set it aside.

The second step is to find the slot where the key is inserted.

This mechanism is supported by a simple step. When the key is inserted into the slot, it can become a switch and connect two wires together. When the circuit is completed, the device can operate. Check the notch, and you can find two wires in the same or different directions. When these wirings are integrated into a complete distribution line, the safety equipment allows the treadmill to start.

The third step is to use a wire cutter or a knife to cut both wires, but as close as possible to the key slot.

At the same time leave as much wiring as possible for operational use. Strip the bottom of each wire with stripping pliers or a knife. Expose at least 1/4 of the bare wiring to ensure good docking. Moisten the ends of the two wires together and wrap them in an insulating tape to ensure that they will not short-circuit or be manually operated over a long period of time.

Step 4 Reassemble the dashboard cover.

Remember to reconnect all the wires that were removed before the correct connection. Tighten the screw from the back and fix it in the correct position. Test the treadmill to see how the bypass works. Remember that the key no longer functions as a safety device. So in the event of an accident, the treadmill will continue to run until it is turned off or unplugged.

After the security keychain is cancelled, you need to pay attention:

Reassemble the dashboard cover. Remember to reconnect all the wires that were removed before the correct connection. Tighten the screw from the back and fix it in the correct position. Test the treadmill to see how the bypass works. Remember that the key no longer functions as a safety device. So in the event of an accident, the treadmill will continue to run until it is turned off or unplugged.