[ Chinese wardrobe net ] [Chinese wardrobe net ] New bedroom decoration is indispensable for wardrobe design, people who know about custom wardrobes know that custom wardrobes make reasonable use of space, functional subdivision, convenient and practical. So what are the common designs for custom wardrobes? Today, the analysis of the four custom wardrobes of the Chinese wardrobe network, let's take a look.
[Four designs of custom wardrobes]
Concave space - in-wall wardrobe
The wall-mounted wardrobe greatly enhances the use of space, not only can effectively expand the living space, but also fashionable, beautiful and practical, and better harmonious and unified with the overall environment, beautiful and practical.
Various spaces - extend the wardrobe to the top
The wardrobe is extended to the top, and the wardrobe is tailored from the bedroom space, so that the usage rate per millimeter is 100%. At the same time, the wardrobe door is used, which is more suitable for space physics.
Beam and column space - Baoliang Baozhu wardrobe
The custom closet can fit the beam and column of the bedroom very well. Through this wardrobe rendering , the part of the beam and the column that is wrapped can be perfectly decorated and decorated with beautiful appearance and increased storage.
Irregular space - corner wardrobe
The reasonable matching of the corner wardrobe will make full use of the original "dead corner", and also reduce the trouble of cleaning up the "dead corner" in the home, making the space arrangement compact and orderly, and at the same time beautiful!
[customized wardrobe sheet specifications]
First of all, look at the panels made of wardrobes. In the custom wardrobe industry, 1220*2440mm gauge plates are commonly used, and the width of the panels is limited. How to open the material to maximize the utilization of the board, reduce the production cost of the product, and finally make the wardrobe not too high.
Analyze how the manufacturer improves the utilization rate of the plates. The cabinets have standards of 300mm, 400mm, 500mm and 550mm. 20mm in the 1220mm board is 2cm. Because the board will be bumped during the transportation process, the corners of the board will collapse. Therefore, the 2cm furniture manufacturer will cut 1cm from side to side for the trimming. Therefore, the remaining 1200mm plate can be sawed 4 pieces of 300mm, 3 pieces of 400mm, 2 pieces of 500mm, and what is the remaining 20mm? Saw into 2 pieces of 10mm to make the sliding door track pad or baseboard. Two pieces of 550mm, the remaining 10mm is still used as a sliding door track pad or baseboard. Finally, take a 1200mm board saw and two 600mm to make the outer side of the closet.
The above method of cutting is the most material and also the best factory process management.
Lever Handle,Window Lever Handle,Lever Lock Handle,Stainless Steel Lever Handle
BNF HARDWARE CO., LTD , https://www.bnfhardware.cn