[ Chinese wardrobe net ] custom wardrobe design is very important for users, but we do not know when it is designed and not good? Today, China wardrobe net custom wardrobe design points are summarized, let's take a look at the following Need to know when customizing the wardrobe!
[What should I pay attention to when designing a custom wardrobe?]
Understand the designer's design drawings, and always talk to the designer about what you want, in order to ensure that the wardrobe you want is perfect.
1. The dimensions of the beam and the column should be measured during the measurement so that they can be wrapped with the plate at the time of design, and can not be seen from the outside, so as to achieve reasonable use and aesthetics of the space.
2. Also consider that the left and right wide side panels of the light should be open L-shaped integral panels.
3. When designing the door to the ceiling of the ceiling, the side of the front side of the beam should be designed to block the beam and seal it from the bottom of the beam to the floor to ensure that the sliding door can be completely closed when closed.
4. The upper top cabinet is designed to open the door and the lower cabinet is the sliding door. The side of the front side of the beam should be sewn from the bottom of the beam to the top of the lower cabinet through the same width plate as the beam. Sealed.
5, when the upper and lower cabinets are designed to open the door, the size of the door should be consistent, so that the wardrobe has consistency and aesthetics.
6. There are switches, cable TV, broadband sockets, etc. in the cabinet area of ​​the design. It should be marked during measurement so as to leave a space when designing, in order to ensure that it can be used in the future.
[What are the maintenance rules for custom wardrobes?]
Wardrobe door maintenance
The door panel is related to the face of the entire inner door, and the clean and bright door panel will make the inner door of the house look good.
1. For the daily cleaning of the door panel, you can wipe it with soft, dry cotton cloth or silk. Wiping with a hard or hard (such as dusty) medium may scratch the surface; if the door panel of the inner door is heavily stained, use a neutral detergent or a furniture-specific cleaner to clean the stain first. , then dry it. But never rinse with water.
2. If the door panel is made of resin or metal plate, remove the slight scratches on the surface. Use a soft cloth to take a small amount of toothpaste and wipe it repeatedly.
3. If the door panel is made of wood or painted lacquer, regular waxing is an effective way to keep the surface bright and bright, while glass or resin sheet does not need waxing.
When it comes to the baby nail trimmer(file),we support customization based on 2000pcs.It is portable and safe.ABS material,easy to use.Can be used to file baby's
fingers or toes.Easy to operate and carry.In this classify,we set a baby nail trimmer and a baby nail clipper set in order to meet the different needs of the family.
Baby Nail File,Baby Nail Trimmer,Baby Finger Clipper,Electric Baby Nail Clipper,Baby Nail Clipper Set
Jiangsu Xinbei Electrical Appliances Co.,Ltd , https://www.whosalebreastpump.com