Demagnetization of the watch Magnetic field is ubiquitous, very hard to detect, the original with a good end of the watch , suddenly go wrong when the larger, we must first guess whether the magnetic. There are a lot of steel mechanical watches , such as the size of steel wheels, escapement wheels, gear shaft tenons, bearings, screws and hairspring, so the watch is very easy to be magnetized. Mechanical watches once magnetized, the impact of the first error is increased, the serious will stop the watch. When wearing a watch, watch inadvertently come into contact with a strong magnetic field generators, motors and other objects, or put the watch on the radio, television set, the watch will be magnetized, the watch will appear walking time is not allowed Phenomenon, and even shut down. In this case, as soon as possible to the watch repair department to repair to professionals, to ensure that the watch is degaussing will not give you more daily inconvenience. So here is a reminder, when wearing a watch, we must pay attention to the watch away from the object of strong magnetic field, so you will not be worried about your beloved watch will be demagnetized. Determine the watch by the magnetic method Compass: The watch near the compass, if the compass deflection is very powerful, then the watch is subject to magnetic. Even if the watch is not subject to magnetic, because the watch itself is made of steel, when the watch close to the compass, the compass will also be fretting, but the degree of deflection is small. This method can also be used to detect the presence of magnetic fields where the watch is stored. Take the compass to the place where the watch is stored, and if the compass is deflected, there is a suspicious magnet nearby. Iron and steel tools at home, such as pliers, are often magnetically close to magnetic objects when they are unaware. Where the watchkeeping should also be removed from such magnetic tools. Watch demagnetizer works Watch demagnetizer is the use of AC power to produce alternating magnetic field, to the mechanical gossamer degaussing. Electronic tube TV boot also has a degaussing circuit, the watch can be placed in front of the screen, and then boot degaussing, but also can have a positive degaussing effect. Once the watch on the magnetic will suddenly go fast, even fast 1-2 hours a day. Wear a mechanical watch should always be careful away from the magnetic field, such as audio, television, cell phones and so on. Love table by magnetic do not have to worry, first with a compass on the table next to see if the compass can have strong fluctuations, if there is by the magnetic, and vice versa there is no magnetic. Watch demagnetizer use method The proper use of the watch degausser is to turn on the power first, press the red switch, hold the watch with the hand, the face up, pass from top to bottom, and then repeat. This has already canceled the magnetic; But pay attention to the movement can not touch the demagnetizer directly, pass the demagnetizer, must be a single direction. Whether it is mechanical watches or quartz watches , there are mechanical rotating parts in the movement. Under the influence of the magnet, mechanical parts are pulled by the magnetic force, of course, can not move. After the magnet is removed, the magnetic force is eliminated and the machine can move around by itself. However, because the mechanical parts in the watch are magnetically attached to themselves as they are close to the magnet. So the future of the rotation process will be greatly affected. The obvious manifestation is that the watch is going slowly. Poly fashion watch network Recommended reading: Quartz watch is good or mechanical watch good ladies watch brand list the world's top ten watch brand watch list