Glashutte mechanical watches do not take the cause and maintenance? Reese Watches watch repair division pointed out that in fact, mechanical watches do not go for many reasons, such as: a bump, the movement of the gear misalignment, the watch by the magnetic, And so on, generally divided into two kinds, the first is because of lack of kinetic energy. The second is due to mechanical watch failure. So when you find that mechanical watches do not go too flustered, we must first distinguish what belongs to the big. Mechanical watch is driven by mechanical gears and clockwork and rotation, inevitably produce friction, so the course of time must be refueling, lubrication, to reduce the wear rate of parts. Or wait until the wrong before sending repair, often the problem has been very serious. The best mechanical watch every year back to the factory check to see if there is improper use or water situation. Such as sweat, rain and dirty air, such as long years of accumulation of chronic erosion caused by the machinery, the frequency and extent of damage than in Europe and the United States, Japan, much higher, so regular inspection is very important; and then once every three years for a thorough cleaning, maintenance. If you check the mechanical watch does not go because the reason is not due to lack of kinetic energy, it is a mechanical watch failure, need to be sent to a professional maintenance staff to repair it. Remember not to open the mechanical watch apart.