Good things should be rich and decorative. First of all, it has to have the beauty, and the beauty of the ultra-thin table, is carved out a beautiful flower on the cliffs, in the sense of proportion can not have the difference, thin, is a limitless and infinite vocabulary, again and again The size of the challenge of beauty. An ultra-thin movement of the research and development to be more time-consuming and laborious, because the size of the restrictions, so from the initial design of the movement must be fully considered. The quantification of this size requires sophisticated computer calculations, taking into account the size and position of the various train wheels, even the size of the barrel and the width of the spring. With the movement and the disk, the pointer should also be taken into account, as well as the case design, grinding and decoration, in order to allow a watch in the ultra-thin while the core value of the movement also wear comfortable, absolutely no difference in design Must rely on the support of high-tech and manual grinding in order to eventually show a rigorous effect. If you want to make a fuss on the ultra-thin form, it is simply take the risk, because the watch is available for mosaic space is very small, so for any diamond grinding and mosaic requirements are higher, each diamond size and location Accurate to no part of the poor, was able to bright precision. Thin as onion skin, used in ultra-thin watch is not an exaggeration. In the 20s and 30s, the size of the case and movement changed from the most traditional 50mm to 30mm, making it a standard in the world of watches. Now, in the world of complex functions swept rivers and lakes, how to make this a breakthrough in decorative, ultra-thin so that the decorative value reached an unprecedented height, almost two dollars a coin thickness, now changed to the dial, which contains ultra-complex The mechanical movement, elegant, but low profile can not. When the watch is under great pressure, such as in water, the glass or crystal mirror will be slightly deformed. For ordinary watches, the impact of this physical phenomenon is not, but if the situation occurs in the ultra-thin watch, watch the space is extremely small, the glass may be pressure deformation when pressure on the pointer, leading to the machine The core stops working, so ultra-thin watches require a higher movement. This article is reprinted from the men's network, if you have any questions, please send an email to wbsj@wbiao.cn to contact us.