The choice of wardrobe materials is very important. It needs to be environmentally friendly, healthy, load-bearing, and aesthetic. The poor selection of materials may result in poor quality of the wardrobe and shortened service life. It may also emit toxic gases such as formaldehyde, which may harm the user's body. health. Which is better for the panels of the wardrobe? What are the plates for the wardrobe? Follow the small series today to find out about this information and provide a reference for future purchases or custom wardrobes.
Wardrobe plate
1. Solid wood panel of wardrobe plate
The solid wood panel wardrobe plate is made of natural wood. It is durable and natural. Most of it has the unique aroma of natural wood. The solid wood panel wardrobe plate has good moisture absorption and breathability, which is good for human health and does not cause environmental pollution. It is made. High-quality plates for high-end furniture and renovated houses. Due to the high cost of solid wood panel wardrobes, high construction requirements, limited wood resources, and easy to construct artificial panels have gradually become the choice of people!
2. The board of the wardrobe sheet
Particleboard Wardrobe is a kind of artificial board which is made by cutting raw materials such as wood into pieces of certain specifications, dried and mixed with adhesive, hardener and waterproofing agent at a certain temperature. The particleboard wardrobe has a relatively uniform plate structure and good processing performance. It can be processed into large-format plates according to needs. It is a good raw material for making different specifications and styles of furniture.
3. High density board of wardrobe sheet
High-density board is a commonly used wood-based board. It is made by shredding and pressing wood, branches, etc. in water. The density is uniform, the strength is high, and the processing is also easy. However, the disadvantage is that the moisture resistance is not good. Kitchens and other wet places should not be used, but it is not bad for making wardrobes.
Wardrobe picking details
1, first look at the selection of the wardrobe. Professional manufacturers use environmentally-friendly plates that meet national testing standards, and some manufacturers use inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a wardrobe, we must first look at whether the merchant has a plate inspection report and relevant testing certificate from the national authority inspection department.
2. Look at the veneer of the plate. Some wardrobes look good on the surface, but with a light stroke on the nails, there will be noticeable scratches. The stickers selected for these wardrobes have poor wear resistance. The professional manufacturer uses the environmentally friendly melamine veneer with thicker immersion paint and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance.
3. Look at the edge of the board. Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After sealing around, it can effectively prevent the moisture in the air from invading the inside of the board. Some manufacturers have no professional equipment, not only the rough cutting, but also the obvious edge collapse. Others even cut corners and only sealed the front side of the board. The remaining unsealed surface absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting its service life.
4. Look at the backplane structure. Professional manufacturers use a backing plate with a thickness of 5mm or more, melamine veneer to prevent the back plate from directly contacting the wall to absorb moisture on the wall. The mainstream custom wardrobe brands on the market are all connected by nail-type backplanes, which are not easily damp, moldy and deformed.
We produce metal bracket according to client's design. Customized mount bracket can be made of mild steel sheet (i.e. steel bracket), stainless steel sheet(i.e. stailnless steel bracket), aluminum sheet (i.e. aluminum bracket), or other metal sheet. Common metal sheet chickness can be from 1mm to 10 mm thick. Other thickenss is also available.
The Metal bracket can be used for machine (i.e. Machine Mount Bracket), can be used to support DC or AC or stepper motor (i.e. motor mount bracket), can be used for lighting (i.e. lighting mount bracket), can be used for construction and decoration (i.e. construction and decoration mount bracket).
We are good at making Weathervane Floor Mounting Bracket,Floor Mounting Brackets,Light Mounting Bracket for client.
Bracket,Brackets,Custom Metal Bracket,Steel Bracket,Stainless Steel Bracket,Aluminum Bracket,Aluminium Bracket,Metal Mount Bracket,Weathervane Floor Mounting Bracket,Floor Mounting Brackets,Light Mounting Bracket
MGX Metalworks Co., Ltd. , https://www.metal-mgx.com