[ Chinese wardrobe net ] In the design and production process of custom closet , the door measure is a very important link. The accuracy of on-site measurement data is directly related to the speed of shipment, product quality and service quality. Only after accurate measurement can the right product be properly designed and the production and installation can be more convenient and accurate.
In the design and production process of custom closet, the door measure is a very important part. The accuracy of on-site measurement data is directly related to the speed of shipment, the quality of the product and the quality of service. Only after accurate measurement can the right product be properly designed and the production and installation can be more convenient and accurate.
In the process of door-to-door measuring, the wardrobe designer not only needs to record the reading data in detail, but also needs to clearly mark the obstacles such as columns and beams. “Drawing sketches, accurate measurements, accurate records, and clear identification†are the four steps that designers must keep in mind when measuring customer room sizes.
The importance of the door measuring ruler on the wardrobe design is self-evident, and as a wardrobe designer, have you mastered the method of measuring the size of the wardrobe?
1 Preparation before measurement
1, measuring tools
★ The main measuring tool 5M-7.5M steel tape measure
★ Auxiliary measuring tool 10M-20M leather tape measure
★ Paper, drawing pen and other record data and other necessary tools
2. It is clear that the customer has completed all the decoration of the wardrobe installation area, including the floor, wall, ceiling, etc.
2 wardrobe measuring method
Multi-point measurement
The multi-point measurement method, also known as the three-point measurement method, obtains accurate data through multi-point measurement, and measures the room size without a doubt.
Three-sided measurement
The "three-sided measurement method" is a plane measurement method, a facade measurement method, and a facade side view measurement method.
In the measurement process, you need to draw a sketch of the plane and elevation layout with a paper and pen, and then measure the size. The higher the accuracy of the measurement size, the better, and the error is not more than 3mm.
The measured data is recorded on the sketch and clearly marked. There must be no missing or unmeasured areas. Multi-point measurement is required for the measurement.
★ Plane measurement diagram
★ Schematic diagram of facade measurement
★ Facade side view measurement method
Sliding door hole size measurement method
The dimensions of the sliding door opening should be accurate plus or minus 2mm. Only the correct size can produce the sliding door of the right size, in order to make the production more correct, the installation is more convenient, and avoid unnecessary loss.
The door hole size measurement method is as shown in the figure below. The multi-point measurement method such as height H1, H2, H3, width W1, W2 is used to measure the accurate sliding door hole size.
With the development of science and technology in daily life, technology has made a lot of things very convenient. People rarely need an axe in their daily life. The axe gives people the feeling that it is a tool for cutting wood and defending themselves. But sometimes the function of an axe can not be replaced by other things. Next, let's learn about the knowledge related to multi-functional axes!
The multi-functional axe is a multi-functional rescue hand tool, a portable hand tool integrating the functions of spade, axe, hammer, pry, saw, etc. It is a good rescue helper carried by the military, armed police, fire fighting, disaster relief and rescue personnel. It can carry out rescue work in various special occasions such as fire scene, disaster scene (broken doors, windows, plates and earthquake, collapse, vehicle and other accidents), and can well solve various rescue problems. It is one of the demolition and rescue tools for rescue and relief, and also an essential tool for survival in field activities.
Features of multi-function axe:
1. The multi-function axe is a portable multi-function hand tool It is a multi-functional hand tool integrating axe, pliers, knife and abrasive tools.
2. The full set of tools are packed with a special tool kit (flame retardant material), which can be buckled on the belt and carried with you. It is very convenient to use.
3. The whole set of products are designed with ergonomics, and the structure is compact and reasonable; According to the different occasions of using the tools, select various high-quality steel materials matching them to meet the use effect.
4. Multi functional hand tool, with detachable function, the whole set of tools only share one main handle, and the only handle is used together with other tool heads.
5. The whole set of tools are mostly machined, with high surface roughness, good matching performance, flexible and convenient use, and beautiful appearance.
Camping Supplies,Camping Gear,Camping Tools,Wilderness Tools,Field Tools
OYEAL Global , https://www.oyeal-home.com