The vacuum cleaner motor is broken, where should I change the vacuum cleaner?

If the family does not go to live after a while, there will be a lot of dust everywhere in the house. At this time, the appearance of the vacuum cleaner is very important. Then in the daily use of the vacuum cleaner, there will be troubles such as vacuum cleaner damage. If there is a problem with the vacuum cleaner, if it needs to be replaced, what should I do? Under normal circumstances, where can we go to repair the vacuum cleaner?

Where is the vacuum cleaner motor broken?

If the vacuum cleaner is broken, what should I do? When the vacuum cleaner starts, it is found that the motor does not turn, so the vacuum cleaner must have failed. First find the cause of the fault, probably the burning of the brush inside the motor or the previous wear is too serious, or the vacuum cleaner circuit is wrong, the vacuum cleaner and the socket are in poor contact.

Where can I replace the vacuum cleaner? If there is a problem with the motor, check the vacuum cleaner motor and the brush confirms that it cannot be replaced while continuing to work. In the case of poor contact, reconnect the power to the vacuum cleaner.

The vacuum cleaner has insufficient suction, which is a very good thing to discover. It can be felt when you turn on the machine. There are too many reasons for this, for example, the speed of the motor is reduced, or the fixed connection between the motor and the fan is loose, and even worse, the vacuum cleaner housing may not be sealed. After you find the fault, check it carefully and find out the reason for taking the method. Motor problem, replace or repair the motor, fix it loosely and fix it again, the seal is not strict, and replace it with a new one. In this way, the life of the vacuum cleaner can be extended.

Where is the vacuum cleaner generally going to be maintained?

If the vacuum cleaner is in normal use, how can it be maintained? In the case that the motor is still working normally, the direct cause of the suction is small or the suction is not: there is no maintenance, no dust is cleaned even if the garbage is not cleaned. After each use, the pipes and inlet and outlet vents were not checked for garbage clogging or the pipe barrel leaked.

Generally, where to repair the vacuum cleaner is better? How to find out which part of the problem is wrong, need to use the discharge method to remove a little bit, because the main principle of the vacuum cleaner is that the motor runs at high speed, then the vacuum suction bucket is vacuumed, and then due to the atmosphere Pressure, the external garbage is sucked into the dust bucket, which is the working principle of the vacuum cleaner. The structure is simple, as long as one by one, you can find the problem.

The vacuum cleaner does not work, which means that the machine is completely powerless. The reason for this may be that the internal fuse has burnt out. This will be replaced by a new fuse and restarted, or the vacuum cable's power line is not well connected, causing insufficient power inside the machine. A socket can be powered on.

Speaking of vacuum cleaners, we certainly won't feel strange, so for this increasingly popular product, we must pay attention to daily maintenance work. Only pay attention to the repair and maintenance of the vacuum cleaner. When there is a problem with the vacuum cleaner at home, and you don't know where to go for repair, you can refer to the introduction of the vacuum cleaner maintenance and repair today.