How to make inkjet thermal transfer the best

[Chinese Packaging Network News] In the digital printing process, apparel fabric printing, fabric transfer is divided into pieces transfer and garment transfer printing. In this transfer process, the method of transferring the pieces and the garments are almost the same. Which is the best way to make the inkjet thermal transfer paper in the transfer process during the transfer process?

1. Please transfer the sample before batch transfer to determine the temperature and time of the transfer machine that affect the color is appropriate.

2, before transfer, to ensure that the inkjet thermal transfer paper is basically dry, so as to avoid incomplete transfer, stains and other phenomena.

3, before the transfer of ink jet thermal transfer paper pattern and fabric blowing finishing, removal of fabric and inkjet thermal transfer paper, paper, cilia and other attachments, so as not to be caught in the inkjet heat Embossed prints between transfer paper and fabric.

4, ghosting is often due to the pressure plate is separated too fast, the upper platen airflow due to the absorption of inkjet thermal transfer paper, then the throttle should be adjusted to make the flat thermal transfer machine cylinder (or cylinder) slower separation , To avoid the transfer of ink jet thermal transfer paper is sucked up after the fall caused by secondary sublimation transfer and ghosting. Avoiding ghosting can also be done on the four corners of the ink-jet thermal transfer paper by adhering water to the fabric transfer or by using inkjet thermal transfer paper.

5, due to the bottom liner material (cotton cloth, sponge, cardboard, etc.) in the absorption of ink moisture accumulation will lead to excessive water vapor during the transfer, so that the color pattern on the transfer cloth becomes lighter, local appearance of aerosol pattern Therefore, before the transfer and during the transfer process, it is often necessary to heat and press the air several times to evaporate the moisture on the lining cotton cloth. If possible, the dry cushion material can be replaced in time to avoid this.

6. Pay attention to the safety of operation in the process of plate transfer. It is forbidden to put your hand under the hot plate, and take care to avoid high temperature scald.