The ozone aging test chamber simulates ozone conditions, and is used for rubber products such as vulcanized rubber, thermoplastic rubber, cable insulation jackets, etc. Under static tensile deformation, it is exposed to closed and non-illuminated air with constant ozone concentration and constant temperature test chamber In the test, the sample is tested at a predetermined time, and the degree of cracking or other performance changes from the surface of the sample. The ozone aging test box is used to scientifically and reasonably achieve the aging cracking test of non-metallic materials and rubber products to evaluate the resistance of rubber to ozone aging.
Ozone aging test box maintenance:
1. Keep the cabinet clean and tidy; avoid dust intrusion into the cabinet.
2. Avoid external forces hitting the cabinet.
3. Chemicals are prohibited from contacting this equipment.
4. Keep the laboratory dry.
5. It is absolutely forbidden to set the temperature to be extremely high.
6. Check the circuit control system before starting each time.
7. Confirmation of power supply and ground wire.
8. Whether the power cord is properly connected according to the specifications and is indeed grounded.
9. Check whether the over-temperature protector has been set.
10. Ventilation fans should be installed in the laboratory to maintain indoor ventilation.
11. Pay attention to observe the water level of the water tank during the spray test, and add pure water in time.
12. The wastewater discharge system of the equipment must be installed in place.
13. After the test, cut off the power of the whole machine.
14. After each test, the sample should be taken out and the inner tank of the equipment should be cleaned.
15. Non-professionals are strictly prohibited to operate this equipment.
Pure Plastic Pen,Basics Plastic Pen ,Plastic click Pen ,Pure Plastic custom Pen
Tonglu shangmei pen industry co.,ltd , https://www.shangmeipenindustry.com