Pine ball is a kind of plant that can resist drought and resist thinness. Therefore, it is not high in fertilizer water. It must not be big and fat, so as not to cause its roots to rot or yellow leaves.
First, the precautions for the cultivation of pine balls
Breeding: The ball pine can be propagated by cuttings, and it is easy to survive. In the spring and autumn growing season, the twigs that are full of growth and development are smashed down, inserted into the basin soil, and the temperature of the soil is controlled and placed in a place with sufficient scattered light. Rooting in about 10 days, becoming a new plant.
Fertilizer: Watering should master the principle of being dry and not wet, avoiding long-term water accumulation, so as not to cause rotten roots. If the ball is loose and the water is clear, the blade can be seen. If the blade is slowly closed, it will need to be replenished. A decadent thin liquid fertilizer or compound fertilizer can be applied for 20-30 days to promote plant growth.
Illumination: Its growth period is from September to May of the next year. It can be preserved in a well-lit area. If the sun is insufficient, the plant will grow long, the distance between the leaves and the leaves will lengthen, and the compact and beautiful plant shape will be lost. Affect the viewing.
Trimming: the ball is easy to germinate the side branches, should pay attention to trimming during maintenance, cut off the dense and chaotic branches in time, especially the new branches of the base, to keep the bonsai dense and decent, natural and beautiful. It should be pointed out that the ball pine branches are fine, and attention should be paid to controlling the height of the plants so that the ratio between the branches and the stems is naturally coordinated. For the cut branches, it can be used as cuttings for cutting propagation. Except for the high temperature season in summer, it is easy to survive regardless of the length.
Slow seedlings and changing pots: The loose leaves of the nets that come out of the net are easy to lick. Under the slow seedlings, they can be planted in tidal soil, placed in a bright and ventilated place (1-2 weeks), and then gradually increase the light. For the vigorous growth of the ball pine, the basin can be changed once a year in the fall. When the basin is changed, the decaying branches and roots are cut off, and the long roots are cut short to promote a strong new root. The new potted plants are placed in a place where there is no direct sunlight for a week, which promotes the recovery and development of the root system. The germination of the ball is strong, and it is easy to germinate the side branches. In the maintenance, the dense and chaotic branches should be cut off in time, especially the new branches of the base to maintain the natural beauty of the plants. For the trimmed shoots, cuttings can be used as cuttings for cutting propagation.
Second, the reason for the yellowing of the pine ball leaves
1. Too much watering, or too much rain, so that the soil is in a too wet state for a long time, causing oxygen deficiency in the soil, leading to rotten roots and yellowing of needles. Suitable soil moisture should be between 15% and 30%, less than 10%, the plant grows poorly, and is easy to wither; more than 35%, easy to rot and die.
2. In the hot summer, the sun is exposed to the sun, the strong light is direct, the water evaporates quickly, causing the tip of the blade to burn and yellow, especially after the rainstorm, the sky turns sunny and direct sunlight, the water supply and demand is out of balance, physiological drought occurs, causing withering.
3. Violation of life habits. Long-term will be placed indoors, lack of light, inadequate ventilation, violated the habit of growing outdoors, or suddenly moved to the outside to be exposed, leaves will appear yellow. In order to avoid the yellowing of the leaves, corresponding prevention and rescue measures should be taken for the above reasons.
The pine ball is cute, although it looks like a pine tree, but its "pine needle" is not tied, but it is very round and lovely. It is a kind of plant that is more suitable to be placed on the desk and adjust the rhythm of life.
Hand pump sprayer's working pressure is from 2 to 8pa , it has a capacity of 1L / 1.5L / 2L / 3L,the material is PE and different color can be offer.It's very convenience to be used. It has high corrosion resistant and durable . Front switch is more easy to control , it can be used for gardens , parks , botanical gardens , etc . there's an exhaust valve in it , When the pressure is out of range , it can protect your safety . Also the effect of fog water is very good , it can also be spray straight line . Meanwhile the size of the atomization can be mediated , Hand pump sprayer has better quality and better drainage . We have many advantages over other products , first of all , we are very stricted in controling over the raw materials , sencondly , we have more than 20 years experience in mold translation . thirdly , we will carry out a complete inspection of each product , we have a complete set of testing equipment to ensure that each product to the hands of customers have no quality problems . Hand pump sprayer has already been the daily tool for people to make plants better . Hand pump sprayer can also used on routine disinfection . It will help your daily life more convenience , more safe .
Hand Pump Sprayer,Hand Held Pump Sprayer,High Pressure Hand Pump Sprayer,Hand Pump Water Sprayer
YUYAO ZHENGYU SPRAYER FACTORY , https://www.zysprayer.com